Smart Building Networks in Coquitlam, BC
Segmented, documented building networks that carry HVAC controls, access, cameras, elevators and tenant traffic without letting any of them touch the others.
Smart Building Networks, scoped for Coquitlam
Coquitlam is a rapidly growing municipality in the Tri-Cities area. Most buildings grew their networks one contractor at a time: the BAS vendor dropped a switch in the mechanical room, the camera installer added another, and the tenant Wi-Fi rides whatever was left. The result is a flat network nobody can draw from memory. We redraw it, segment it and put it under change control. In Coquitlam, we apply that thinking to a regional economy built on a dense mix of trade, logistics, film, technology, healthcare and professional services anchored by the Port of Vancouver and YVR, which shapes tenant types and building age. The scope that follows reflects your actual properties and not a template written for another market.
What it costs
Smart Building Networks in Coquitlam is quoted fixed-price after a free 30-minute consultation. Reference points: projects from $2,500, managed IT from $89 to $199 per user per month, vCIO from $1,500 per month and security assessments from $1,900. Suite count, building age, number of sites and after-hours requirements decide where a quote lands. A 10% launch discount applies and GST is extra.
Local conditions that affect the work
Buildings in the Lower Mainland contend with earthquake exposure along the Cascadia margin, atmospheric-river flooding in low-lying areas and the occasional wide-area carrier outage. Those conditions influence where equipment is installed, how it is powered and how quickly a failure can be repaired. Infrastructure is described by dense fibre, carrier-neutral data centres and a deep pool of local IT talent, but also heavy competition for it and constant office-lease churn. In Coquitlam we factor both into the design of smart building networks, choosing mounting locations, backup power and failover paths that match the real hazards.
Standards, documentation and ownership
Our platforms for smart building networks, such as Cisco Meraki, Ubiquiti UniFi, Fortinet FortiGate, Aruba, BACnet/IP segmentation and Cat6A and fibre risers, are chosen for supportability. You own the equipment, the accounts and the documentation. Administrative credentials are stored in a vault you control, and a printed one-page summary for each building is left in the telecom room or property office.
Working inside an occupied building
Occupied properties rule out the usual shortcuts. For smart building networks in Coquitlam, we coordinate with the on-site team, book elevators and riser access, post notices where needed and finish each day with equipment secured and systems working. Photographs of every closet before and after become part of your permanent record.
Scope and deliverables for Coquitlam buildings
Deliverables are specific. For smart building networks in Coquitlam that usually starts with network survey and as-built documentation of every closet, riser and uplink, then extends to documentation, testing and training for property staff. We state which parts are done on site and which remotely, who provides access to riser and mechanical rooms, and what the building needs to supply, such as power, rack space or carrier cooperation.
What you get in Coquitlam
- Network survey and as-built documentation of every closet, riser and uplink
- VLAN and firewall design separating BAS, access, video, tenant and office traffic
- Managed switching with port-level labelling and configuration backups
- Vendor remote access through a logged, time-limited gateway
- Dual-carrier uplink or LTE failover with automatic switchover
- Change log and quarterly configuration review
Faults this removes
- Building automation, cameras and tenant devices sharing one flat network
- Switches in electrical and mechanical rooms with default passwords and no inventory
- No as-built drawings, so every fault starts with tracing cables by hand
- Vendors with permanent remote access into the building controls
Typical platforms
- Cisco Meraki
- Ubiquiti UniFi
- Fortinet FortiGate
- Aruba
- BACnet/IP segmentation
- Cat6A and fibre risers
See the full Smart Building Networks service page, or explore building IT in Coquitlam.
Frequently asked questions
What does smart building networks include for a Coquitlam property?
Typical deliverables include network survey and as-built documentation of every closet, riser and uplink, along with drawings, a configuration backup and a handover session. The exact scope is written into a fixed-price proposal that lists outcomes, assumptions and exclusions.
Do you handle smart building networks for Coquitlam buildings remotely?
Mostly, yes. Design, configuration, monitoring and documentation are done remotely from Vancouver. Where physical work is required, we coordinate a local technician and keep you in contact with a single project lead.
Which platforms do you use for smart building networks?
Common platforms include Cisco Meraki, Ubiquiti UniFi, Fortinet FortiGate, Aruba, BACnet/IP segmentation and Cat6A and fibre risers. We prefer mainstream, supported equipment that another provider could take over, and we document every configuration so the system belongs to you.
How much does smart building networks cost in Coquitlam?
Projects start from $2,500 and rise with building count, suite count and complexity. Managed support runs $89 to $199 per user per month, vCIO from $1,500 per month and security assessments from $1,900. A 10% launch discount applies and GST is added at 5%.
How do you measure success for smart building networks?
Target: every device on a named VLAN, a current network drawing per building, and uplink failover tested twice a year. We report against these indicators and review them with your leadership each quarter.